The Brake Alignment Tool makes it easy to set the correct pad gap on any hydraulic brake caliper, the Brake Alignment Tool inserts rubberized steel on either side of the disc to obtain the correct pad spacing and It Stops Brake Rub.
This folding stainless-steel and aluminum tool are small and light so that you can even take it along on rides if you want. The aluminum body of the tool works as a brake pad spreader (once the wheel is removed), a braking power tester, and a pad gap feeler gauge.
They’re unfolded from the tool like opening a pocket knife and then slid in between the rotor and the brake pads to act as thin shims to help center the brake caliper to stop rubbing.
Stop Brake Rub, Align Your Disc Brakes Faster
Easy to carry and storage, foldable design
Compatible with all types of disc brakes
Hold on to the brake you’re working on by squeezing the lever and keeping it squeezed. This will center the caliper over the rotor. keep holding the brake on and then tighten the bolts fixing the caliper to the frame again. Be sure to torque them!
Now it's easy to Stop Brake Rub, Align Your Disc Brakes Faster!
PROTECT YOUR BIKE RIM WHILE MAKING INSTALLING YOUR TIRE EASY WORK
THE RIM PROTECTOR tool makes light work of tight tire beads; simply position the slotted jaw onto the opposing rim and place the hook under the stubborn bead, then roll the bead over the rim into place.
Great tool for installing all types of tires. This tool will NOT damage the rim edges because the pressing force is from the top to the bottom. Unlike traditional tire levers' leverage to install a tire will damage those weak rim edges such as carbon wheels.
PROTECTING INNER TUBES:
Fits up to 3" tires. The special bear jack tool will NOT puncture any inner tube. Save time and effort! Length: 23cm or 9". Weight: 120g or 4.25 oz.
The jack is made of strong nylon plastic which prevents scratching rims and puncturing inner tubes.
Easy to install
Very easy to install a tough tire on the wheel.
No more damaging the rim edges.
Comfortable To Use :
CYCLINGCORE'S Bicycle Tire Lever’s ergonomic shape ensures they sit comfortably in the hand when removing a tire off a rim. Levers also feature an ‘indentation feature’ for your thumb, giving it a great feel in the hand when being used.
THE RIM PROTECTOR makes light work of tight tire beads!
Regular price$ 24.97 USD
TheDUMMY HUBslides into the rear dropouts of a bicycle frame and replaces the rear wheel, keeping the chain in place while the wheel is removed for cleaning, service, or transportation.
The DUMMY HUB is compatible with all multi-speed and 1/8" chain and can be used on frames featuring open dropouts or 12mm thru-axles.
The unique design allows the bicycle to be pedaled and the derailleur to be shifted, making the CYCLINGCORE'S DUMMY HUB an essential tool for chain cleaning or diagnosis of some derailleur issues.
Replaces the rear wheel on a bicycle for cleaning and transport
Works with all derailleur and 1/8" chain
Compatible with quick-release and 12mm thru-axle bike frames
Allows the bike to be shifted with the wheel removed
The DUMMY HUB makes cleaning and transporting bikes much easier. It's designed to keep your chain under tension to enable pedaling forwards or backward and to allow rear derailleur movement with the rear wheel removed. This is useful for a number of reasons.
Also, if you're a stickler for keeping your drivetrain as clean as possible, lubing the chain and leaving it set up on the DUMMY HUB as opposed to the cassette will keep things a bit cleaner.
It's a simple idea beautifully executed and compatible with most current road bikes and many future ones using the 142x12mm standard thru-axle. And it's small enough and light enough to fit in a toolbox or case for a trip.
No, it's probably not at the 'essential' end of the Bike Tool To Buy Next scale, but when you get one you'll wonder why you waited so long.
Makes cleaning and transporting bikes much easier, by allowing shifting and pedaling with the back wheel off!
Regular price$ 29.97 USD
Product description :
The Cyclingaid Multi-tool is developed to provide functions that are not found on a typical multi-tool and it is light and compact so you can carry it with you. This tool serves as a tire lever, Presta valve core remover, valve stem lock nut wrench, and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self closes the tool.
Cyclingaid Multi-tool developed to provide functions that are not found on a typical multi-tool and it is light and compact so you can carry it with you on your bike.
This tool serves as a tire lever, Presta valve core remover, valve stem lock nut wrench, and master link pliers.
It also provides storage for two master links so you will always be prepared on the trail.
Magnets hold the master links securely in place and self closes the tool.
Pliers work with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains)
Master Link storge is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link, and other similar master links (not compatible with Connex Links by Wipperman)
enjoy functions that are not found on a typical multi-tool, light, and compact so you can carry it with you.
Chain Cleaning Tool
$ 29.97 USDSale price$ 19.97 USD
Chain and gear cleaning has never been faster or easier!
Scrub the chain with the compact bristles of The Chain Cleaning Tool to clean all four sides of a chain. Use the long bristled end to clean other components like sprockets, derailleurs, crankset, brakes, and pedals.
Regular component cleaning prevents premature wear and tear on chain and sprockets, eliminates chain skipping caused by dirt and grunge, and assures smooth operation of drive train and brakes.
Gear and Chain Cleaning Tool
Clean your bicycle gears and chain quickly and efficiently with the Grunge Brush from Finish Line. Thanks to its smart design, this brush offers everything you need to get into the tough-to-reach parts of your drive train and chain for a thorough scrub.
Clean all four sides of the chain--at the same time--with the compact, full-surround bristles of Grunge Brush.
Use the long bristled end to reach in and clean sprockets, derailleurs, crankset, brakes, and pedals.
The Chain Cleaning Tool's heavy-duty, stiff bristles will clean deeply for a long time. The bristle blocks on the chain cleaner are removable for easy cleaning.
The most widely used cycling lubrication in the world
Made with the highest quality ingredients.
Greatly reduces transmission and bearing friction
Easy-to-use multipurpose brush for gears, chains, and other bicycle components
Bristles lock chain around for efficient cleaning on four sides
Long, stiff bristles to access hard-to-reach components
Brush bristle blocks are removed for cleaning
Help prevent premature wear of your transmission and helps maintain smooth operation.
It eliminates chain skipping caused by dirt, grunge and assures smooth operation of drive train and brakes.
Regular component cleaning and maintenance help prevents premature wear and tear on your bike's chain and sprockets.
Keeping your drive train clean also eliminates chain skipping caused by dirt and grunge, and assures smooth operation of the drive train system and brakes.
Make it easy with the Chain Cleaning Tool.
TUBELESS SEALANT INJECTOR
Regular price$ 17.99 USD
The TUBELESS SEALANT INJECTOR takes the headache out of tubeless installation with a simple and effective design with a simple Setting up.
The tubeless sealant injectors go over the valve which causes the sealant to gunk up the valve and not allow air into the tire.
WE MAKE IT EASY.
SIMPLE TO USE
We were wondering why sealant was such an annoying, messy process. Then we figured out it didn't have to be. Meet the tubeless tire's best friend.
VALVE CORE TOOL INCLUDED
Don't stress about removing the valve core, we provide either a plastic valve core tool or an aluminum valve core tool, to make sure you can get the whole job done. Just add Sealant!
Traditional tubeless sealant injectors go over the valve which causes the sealant to gunk up the valve and not allow air into the tire. Our design allows for the syringe to go all of the way to the tire without clogging up the valve.
WORKS WITH YOUR
Worried that our Tubeless Tire Sealant Injector won't work with your favorite brand of tubeless tire sealant, like Stan's No Tubes Tire Sealant? Don't be!
The TUBELESS SEALANT INJECTOR works with any low-viscosity tubeless tire sealant like Stan's No Tubes, Bontrager, Slime, & OrangeSeal.